M-10DX

10-Channel Digital Mixer

M-10DX
Discontinued

Portable 24-bit/96kHz Digital Mixer with Built-in Spectrum Analyzer

More portable and affordable than its M-16DX big brother, the M-10DX packs an amazing amount of high-end features into its small frame, including a 24-bit/96kHz processing engine and a backlit LCD so you can see the effects in operation, as well as a graphical spectrum analysis.

Advanced Specs

Based on the same high-resolution processing engine as the flagship M-16DX, the M-10DX provides full 24-bit/96kHz processing for the ultimate in transparent digital mixing. Mixing is made simple, with dedicated channel controls for 3-Band EQ, Pan, Aux, Select, and Level.

Visual Mix Magic

For maximum portability, the M-10DX condenses almost all of the M-16DX’s functions into a compact tabletop package for easy portability and use anywhere. It even retains the backlit LCD from its big brother, so you can see the effects in operation, as well as a graphical spectrum analysis.

Number of Input Channels
10 channels
AD/DA Conversion
96.0 kHz: 20 Hz to 40 kHz (+3/-3 dB), 48.0 kHz: 20 Hz to 22 kHz (+3/-3 dB), 44.1 kHz: 20 Hz to 20 kHz (+3/-3 dB)
Residual Noise Level (IHF-A, typ.)
MAIN MIX LEVEL knob = -∞, Channel LEVEL knobs = -∞, MAIN MIX LEVEL knob = U, Channel LEVEL knobs = -∞: -88 dBu, MAIN MIX LEVEL knob = U, Channel LEVEL knobs = U: -82 dBu
Nominal Input Level
MIC connectors 1–2: -60 to -10 dBu, LINE IN jacks 1–2: -40 to +10 dBu, * Maximum input level: Nominal input level + 22 dB, LINE IN jacks 3–10: +0 dBu, LINE IN jacks 9–10 (RCA pin type): -10 dBu, * Maximum input level: Nominal input level + 18 dB
Input Impedance
MIC connectors 1–2: 2.7 kΩ, LINE IN jacks 1–2: 28 kΩ, LINE IN jacks 3–8: 20 kΩ, LINE IN jacks 9–10 (RCA pin type): 20 kΩ
Nominal Output Level
+0 dBu, * Maximum output level: Nominal Output Level + 22 dB
Recommended Load Impedance
10 kΩ or greater
Display
Graphic LCD 122 x 32 dot (with back-light)
Connectors
MIC connectors 1–2: XLR type (balanced / phantom power +48 V), LINE IN jacks 1–10: 1/4 inch TRS phone type (balanced), * LINE IN jack 1: supports use of hi-impedance, LINE IN jacks 9–10: RCA pin type, MAIN OUT jacks L–R: 1/4 inch TRS phone type (impedance balanced), AUX SEND jack: 1/4 inch TRS phone type (impedance balanced), 2 TRACK OUT jacks L–R: RCA pin type, DIGITAL OUTPUT jack/connector: Optical type, Coaxial type, PHONES jack: Stereo 1/4 inch phone type, CTRL ROOM jacks L–R: 1/4 inch phone type (impedance balanced)
DSP processing
Room Acoustic Control (built-in microphone), Finalize: Enhancer/Multi-band Compressor-Limiter, Insertion effects: Power compressor/Vocal enhancer/Narration enhancer, Echo/Reverb: Short echo/Echo/Room reverb/Small hall reverb/Large hall reverb
Power Supply
DC 9 V (AC adaptor), Alkaline dry battery LR6 (AA) type x 8 or Nickel metal-hydride battery (HR15/51) x 8
Current Draw
950 mA, * Expected battery life under continuous use: Nickel metal-hydride: 3 hours, Alkaline: 1.5–2 hours, These figures will vary depending on the actual conditions of use.
Phantom Power
+48 V/5 mA (each input)
Accessories
Owner’s manual, AC adaptor
Size and Weight
Width
199 mm
7-7/8 inches
Depth
262 mm
10-3/8 inches
Height
61 mm
2-7/16 inches
Weight
1.3 kg
2 lbs. 14 oz.
*The specifications are subject to change without notice.