GO:MIXER PRO Smartphone Compatibility ( iOS 14 / iPadOS 14 )

Model
Maker Model OS
Apple iPhone 12 mini *1 iOS 14
iPhone 12 *1
iPhone 12 Pro *1
iPhone 12 Pro Max *1
iPhone 11 *1
iPhone 11 Pro *1
iPhone 11 Pro Max *1
iPhone XR *1
iPhone XS *1
iPhone XS Max *1
iPhone X *2
iPhone 8 *2
iPhone 8 Plus *2
iPhone 7 *2
iPhone 7 Plus *2
iPhone 6s *2
iPhone 6s Plus *2
iPhone SE (2nd generation) *1
iPhone SE *2
 
Maker Model OS
Apple iPad Pro 12.9-inch (4th generation) *1 iPadOS 14
iPad Pro 12.9-inch (3rd generation) *1
iPad Pro 11-inch (2nd generation) *1
iPad Pro 11-inch *1
iPad Pro 12.9-inch (2nd generation) *2
iPad Pro 10.5-inch *2
iPad Pro 12.9-inch (1st generation) *2
iPad Pro 9.7-inch *2
iPad Air (3rd generation) *2
iPad Air 2 *2
iPad (7th generation) *2
iPad (6th generation) *2
iPad mini (5th generation) *2
iPad mini 4 *2

* Does not run on the iPad (5th generation).

*1: If you use other than the iOS camera app, recording is sometimes monaural. If this happens, stereo recording can be accomplished by following the steps below to perform visual recording.
*2: Recording might be monaural. If this happens, stereo recording can be accomplished by starting visual recording following the steps below.
 
  1. Make the connection between the iPhone or iPad and GO:MIXER PRO, then start the standard camera or the 4XCAMERA app.
    Make sure GO:MIXER PRO's POWER indicator is lit.
  2. Go back to the home screen on the iPhone or iPad.
    * When you go back to the home screen, the POWER indicator goes dark.
  3. Start the app again.
    Make sure GO:MIXER PRO's POWER indicator is lit.
  4. When visual recording starts, the audio is recorded in stereo.

Apps
  • iOS app "4XCAMERA"
  • iOS app "4XCamera Maker"
  • iOS app "Beat Sync Maker"
  • iOS app "Virtual Stage Camera"
  • iOS Camera app (when using video mode)
    Make the connection with GO:MIXER PRO before starting the application.
    If the application is started before making the connection with GO:MIXER PRO, right-channel audio is sometimes not recorded.
  • GarageBand for iOS app (set Input setting to 'Stereo')
    If you're using GarageBand for iOS, make the settings as follows.
    - Use "Audio Recorder."
    - Make the settings as follows.
    1. Set [LOOP BACK] switch to "OFF."
      * In this case, you can't use the [MONITOR OUT] knob to control the volume of the smartphone that's connected to the USB port.
    2. With the GO:MIXER PRO connected, select "Audio Recorder."
      If the message "Audio Device Connected" is displayed when the GO:MIXER PRO is connected, tap [Cancel].
    3. Tap the Input button.
    4. Tap [Channel] and set it to "Stereo."
    5. Set [Monitor] to "off."

  • iOS Music Memos app (set Input setting to 'Stereo')
    - Make the settings as follows.
    1. Tap the Input button.
    2. Tap [Channel] and set it to "Stereo."
    3. Set [Monitor] to "off."
    NOTE:
    When using the Roland GO:MIXER PRO with Music Memos, it is not possible to monitor existing tracks through GO:MIXER PRO while recording a new performance.
     
  • iOS FiLMic Plus (set Audio setting to 'Stereo')
    - Make the settings as follows.
    1. Tap the Setting button.
    2. Tap the Audio button.
    3. Tap [ > ] and set it to "Stereo."


Situation of Livestreaming with GO:MIXER PRO
Please check the support status with "Support status for live-streaming and videophone apps (iOS 14 / iPadOS 14 )."

* The information here indicates only the results of confirmation of operation for a Roland product, and does not warrant that the relevant terminal is free of problems.

Support