---

Model

Maker	Model	OS
Apple	iPhone XR	iOS 12
	iPhone XS
	iPhone XS Max
	iPhone X
	iPhone 8
	iPhone 8 Plus
	iPhone 7
	iPhone 7 Plus
	iPhone 6s
	iPhone 6s Plus
	iPhone 6
	iPhone 6 Plus
	iPhone SE
	iPhone 5s
	iPad Pro 12.9-inch (3rd generation)
	iPad Pro 11-inch (3rd generation)
	iPad Pro 12.9-inch (2nd generation)
	iPad Pro 10.5-inch (2nd generation)
	iPad Pro 12.9-inch (1st generation)
	iPad Pro 9.7-inch (1st generation)
	iPad Air 2
	iPad (6th generation)
	iPad (5th generation) *1
	iPad mini 4
	iPad mini 3
	iPad mini 2

*1: The iOS Camera app does not run. This has been reported to Apple (May 30, 2018).

* Make and release the connection between the GO:MIXER PRO and the smartphone only when the app you're using is not running. Connecting or disconnecting the GO:MIXER PRO while the app is running can result in noise being recorded. If noise occurs, restart the smartphone. (July 1, 2019)

Apps

• iOS app ":Beat Sync Maker"
• iOS app ":Virtual Stage Camera"
• iOS app ":4XCAMERA"
• iOS Camera app (when using video mode)
  Make the connection with GO:MIXER PRO before starting the application.
  If the application is started before making the connection with GO:MIXER PRO, right-channel audio is sometimes not recorded.
  
  * When visual recording is done using the iOS Camera app under iOS 11.3/iOS 11.4, in rare cases, right-channel audio fails to be recorded. This is currently under investigation (May 30, 2018).
  
  
• GarageBand for iOS app (set Input setting to 'Stereo')
  If you're using GarageBand for iOS, make the settings as follows.
  - Use "Audio Recorder."
  - Make the settings as follows.
  
  1. Set [LOOP BACK] switch to "OFF."
     * In this case, you can't use the [MONITOR OUT] knob to control the volume of the smartphone that's connected to the USB port.
  2. With the GO:MIXER PRO connected, select "Audio Recorder."
     If the message "Audio Device Connected" is displayed when the GO:MIXER PRO is connected, tap [Cancel].
  3. Tap the Input button.
  4. Tap [Channel] and set it to "Stereo."
  5. Set [Monitor] to "off."


• iOS Music Memos app (set Input setting to 'Stereo')
  - Make the settings as follows.
  
  1. Tap the Input button.
  2. Tap [Channel] and set it to "Stereo."
  3. Set [Monitor] to "off."
  NOTE:
  When using the Roland GO:MIXER PRO with Music Memos, it is not possible to monitor existing tracks through GO:MIXER PRO while recording a new performance.
  
  
• iOS FiLMic Plus (set Audio setting to 'Stereo')
  - Make the settings as follows.
  
  1. Tap the Setting button.
  2. Tap the Audio button.
  3. Tap [ > ] and set it to "Stereo."

Situation of Livestreaming with GO:MIXER PRO

* The information here indicates only the results of confirmation of operation for a Roland product, and does not warrant that the relevant terminal is free of problems.

---