Q:Which smartphones are compatible with GO:MIXER?
A:
Android smartphones and iPhones which meet following requirements:
- Android device: Micro USB type-B port, USB-OTG function supported, Android OS 6.0
- iOS device: Lightning port, iOS 10
For the specific models, please refer to the following URL.
GO:MIXER Smartphone Compatibility
Q:Which Android smartphones support USB-OTG function specifically?
A:
Q:Which apps can be used for recording audio via GO:MIXER?
A:
Standard apps which come with the OS for recording video and audio (please refer to the following URL).
Not all apps are warranted for full function with GO:MIXER.
* It is not possible to monitor existing tracks through GO:MIXER while recording a new performance.
GO:MIXER Smartphone Compatibility
Q:What is the CENTER CANCEL function at LINE IN 1 input?
A:
If you connect an audio player to LINE IN 1 input and play back music with the CENTER CANCEL switch set to ON, the audio elements located at the center of the stereo audio mix such as lead vocal and guitar solo can be minimized. This is useful for karaoke, guitar practice, etc. (Some audio elements may not be cancelled clearly depending on how they are mixed in the original recording.)
Q:What type of microphone can be used?
A:
Dynamic microphone with 1/4 inch phone plug.
Condenser microphones requiring phantom power or plug-in power supply are not supported. Self battery-powered condenser microphones may work.
Q:On GO:MIXER, can I mix my singing/playing with the playback from the smartphone connected to GO:MIXER via USB, and record them into the smartphone via USB at the same time?
A:
No.
Q:Can I connect electro-acoustic guitar or electric bass directly to GO:MIXER?
A:
Yes. The GUITAR/BASS input is designed for high-impedance signals, such as those from string instruments equipped with a pickup.
Q:Can I use any USB cable in the market?
A:
No. Please use the USB cable bundled with GO:MIXER.
Q:Can I use the USB cable bundled with GO:MIXER for other devices?
A:
We only warrant the included USB cable for use with GO:MIXER.
Q:I mixed my performance on GO:MIXER and recorded to the smartphone via USB, then played back the result on the smartphone and checked via MONITOR OUT on GO:MIXER, but the volume is lower than when I recorded.
A:
The difference between performance volume on GO:MIXER and playback volume from smartphone is normal. This is not a malfunction of GO:MIXER. Please adjust the MASTER OUT knob for the appropriate volume for monitoring.
Q:Noise is generated on the input signal from MIC input.
A:
Noise may be generated if the MIC volume knob is turned up. It may be improved by singing/playing closer to the microphone or using a microphone with better sensitivity and adjusting the MIC knob to a lower level.
Q:Noise is generated.
A:
If a microphone or guitar/bass is not connected to GO:MIXER, turn the knobs of MIC or GUITAR/BASS down to minimum level.
Q:PEAK indicator keeps turning on when recording. Is the level set correctly?
A:
If the PEAK indicator light, the level is too high. Use the knobs to adjust the levels of MIC, GUITAR/BASS and INSTRUMENT so that the PEAK indicator illuminates only at the moment you play/sing at the maximum volume.
Q:Sound quality of the vocal or other instruments played from the device connected to LINE 1 input on GO:MIXER is strange or cannot be heard well.
A:
Please make sure the CENTER CANCEL switch at LINE 1 input is OFF.