Roland - Support - R-07 - Opdateringer & Drivere

R-07 System Program ( Ver.1.112 )

HOW TO TELL THE VERSION

Please check the version of the system working on your R-07 before downloading the archive file.

Press [ MENU ] to invoke the menu screen.
Use the [ Down/Up ] button to select "16 Information," then press the [ REC ] button.
The message "Information" appears.
Use the [ Down/Up ] button to display "VERSION."
The current version of the R-07 is displayed.
After checking the version, turn off the power to the R-07.

* Don't perform the update if the product is already up-to-date.

UPDATE HISTORY
[ Ver.1.112 ] MAR 2024

Additional Functions

R-07 itself

Added a function to limit the volume when using headphones.
(Because there is a risk of damage to hearing when recording / playing at high volume for a long time.)
When using headphones, if the volume is set to 55 or higher, the message "Increase volume? It may damage your hearing." appears.
If the volume is set to 55 or higher and the headphones are plugged into the PHONES jack, the message "Keep volume high? It may damage your hearing." appears.
If you choose "No" and press [ REC ], the volume is limited to a maximum of 54.
If you choose "Yes" and press [ REC ], the volume limit will be lifted for the next 20 hours of continuous playback.
The initial value of "Date & Time Adj." ([ MENU ] - "Bluetooth" - "Remote Control") was changed to "ON."

R-07 Remote

Added a function to limit the volume when using headphones with the R-07 itself.
(Because there is a risk of damage to hearing when recording / playing at high volume for a long time.)

[ Ver.1.100 ] MAR 2019

Additional Functions
Please refer to the "Functions Added in R-07 System Program Ver.1.10" for detailed information in the [ Owner's Manuals ].

R-07 itself

You can connect the R-07 via USB to your computer, iPhone, or iPad, and use it as a USB audio interface.
Supported operating systems are as follows.
Windows 7, Windows 8.1, Windows 10
OS X 10.10, OS X 10.11, macOS 10.12, macOS 10.13, macOS 10.14
iOS 11, iOS 12

* Only Sample Rate "44.1 kHz / 48.0 kHz" is supported.
* It does not support Android.
If "Recording mode" is set to 2xWAV (Dual level recording), you can adjust the volume of the quieter recording.
The name of the CODEC on the connected Bluetooth A2DP device is now displayed on the Bluetooth/Information screen.

R-07 Remote

By operating an "R-07 Remote" app installed on your mobile device, you can simultaneously control up to four R-07 units.
You can also start recording on multiple R-07 units simultaneously.
You can perform playback operations from an Apple Watch.

Functionality Improvements

R-07 Remote

Operation from an Apple Watch even while the iPhone is in sleep mode is now possible.
Connectivity between the R-07 and R-07 Remote has been improved.

Bug Fixes
The following bugs were fixed.

R-07 itself

Transfer speed when connected via USB sometimes grows slow.
The rehearsal function fails to work when the Rec Mode is set to "2xWAV (Dual level recording)."

< If You're Using R-07 Remote >
Using the new functionality in R-07 Remote requires updating the R-07 Remote app.

iOS version

Use R-07 Remote when updated to version 1.1.2 or later.
* R-07 Remote version 1.1.2 can be used under iOS 11 and after.

Android version

Use R-07 Remote when updated to version 1.1.2 or later.
* R-07 Remote version 1.1.2 can be used under Android 5 and after.

[ Ver.1.090 ] JUL 2018

Bug Fix
The following bug was fixed.

Lengthy recording times sometimes produce an unplayable file.

WHAT YOU WILL NEED TO UPDATE YOUR R-07

R-07
Micro USB cable (Dedicated charging cables cannot be used.)
A computer with a USB connector ( Windows, Mac )

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the R-07. This update data may destroy the data or system program of other products.
Never power-off your R-07 while the update is in progress!
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "r07_sys_v1112.zip" file on your computer to get the update file in the "r07_sys_v1112" folder.

PROCEDURE FOR THE UPDATE
Caution

You must not rename the extracted file.
When performing the update, keep the unit supplied with power via the USB port.
If performing the update while the unit is running on battery power is unavoidable, before performing the update, check to ensure that sufficient battery power is remaining.
Never turn off the R-07's power while the update is in progress. Otherwise the system program or the R-07 itself may be destroyed.

Please install the extracted system program file into your R-07 according to the following procedure.

Turn on the power to the R-07.
Connect the computer to the R-07's USB port by a USB cable.
When the message "Select USB Mode" appears on the R-07's display, select "Storage" and press the [ REC ] button.
When a connection is established between the R-07 and the computer, the message "Now connecting" appears on the R-07's display.
Open the "R-07" drive folder in your personal computer.
Inside the "r07_sys_v1112" folder is R-07.UPD. Copy this R-07.UPD (by dragging and dropping) to the "R-07 (Removable Disk or NO NAME)" drive's root directory (the hierarchical level reached immediately after opening the drive).
* Do not copy the "r07_sys_v1112" folder.
After copying the file is completed, remove the USB drive from the personal computer.
With Windows
Right-click on the "R-07" icon in My Computer and execute "Eject."
With macOS / OS X
Drag the "R-07" icon to the Trash icon in the Dock.
Disconnect the USB cable.
Turn off the power to the R-07.
Using the USB cable, again connect the R-07 and the computer.
(Connect the USB cable and supply power via the USB port).
Hold down the [ REC ] button and again turn on the power to the R-07.
The message "Program Update" appears on the display.
When the message shown on the display changes to "Update, Push [REC]," press the [ REC ] button to start the update.
When the message "Complete!!" appears on the display, the update has finished.
Disconnect the USB cable.
Turn off the power.

* Updating can also be performed by inserting into the R-07 a microSD card on which R-07.UPD has been saved in the root directory.
* For the microSD card to use for updating, use a card that has already been formatted (initialized) on the R-07.

Licensaftale for Roland Software

Læs venligst dette dokument grundigt, før du fortsætter med download eller installation. Denne aftale licenserer softwaren til dig og indeholder garanti og ansvarsfraskrivelser for erstatningsansvar. Ved at vælge knappen "Download" bekræfter du din accept af disse ansvarsfraskrivelser og accepterer at være bundet af bestemmelserne i denne aftale. Hvis du ikke kan acceptere disse vilkår, skal du ikke downloade materialet. Du kan udskrive en kopi af denne licensaftale ved at vælge denne mulighed nedenfor.

Roland Corporation vil under ingen omstændigheder være ansvarlig over for slutbrugerne for skader, herunder men ikke begrænset til finansielle skader for tab af fortjeneste eller oplysninger som følge af brugen af eller manglende evne til at bruge denne opdatering. Den foranstående bestemmelse er gældende, selv om Roland Corporation er blevet informeret om muligheden for sådanne skader.

Dette er en juridisk aftale mellem dig (en person eller et selskab) og Roland Corporation (i det følgende benævnt "Roland") vedrørende brugen af dette softwareproduktet (i det følgende benævnt "SOFTWARE"). Læs venligst omhyggeligt betingelserne i denne licensaftale, før du installerer eller bruger SOFTWAREN. Ved at installere, kopiere eller begynde at anvende SOFTWAREN, giver du hermed samtykke til vilkårene i denne licensaftale.

1. LICENSTILDELING

Roland giver dig følgende ikke-eksklusive rettigheder til at bruge SOFTWAREN i overensstemmelse med vilkårene i denne licensaftale.
(a) Du må kun bruge SOFTWAREN på en specifik enkelt computer ad gangen. Brug af SOFTWAREN omfatter indlæsning af SOFTWAREN til midlertidig hukommelse (dvs. RAM) eller installation af SOFTWARE på lagermedier (dvs. harddisk) på den computer, hvor du vil bruge SOFTWAREN.
(b) Du må fremstille én kopi af SOFTWAREN, men kun til sikkerhedskopieringsformål (på diskette, magnet- eller optisk disk, DAT eller lignende medier), men må ikke foretage nogen anden kopiering.

2. COPYRIGHT

SOFTWAREN og copyrights tilhører Roland og er beskyttet af alle internationale ophavsretlige love og traktater.
Derfor skal du behandle SOFTWAREN som ethvert andet ophavsretligt beskyttet materiale (dvs. en bog eller en cd). Alle rettigheder, der ikke er fastsat heri, er forbeholdt Roland.


3. ANDRE BEGRÆNSNINGER

(a) Du må ikke ændre, foretage reverse engineering, dekompilering eller adskillelse af SOFTWAREN eller i meddelelsen om ophavsret og copyrightlogo.
Uautoriseret kopiering, opload til et andet netværk, distribution, ændring og/eller tilknytning af denne software til andre medier eller enhver anden form for salg er udtrykkeligt forbudt.
(b) Du må ikke udlåne, udleje, lease, give i underlicens eller overdrage SOFTWAREN, enten helt eller delvis til tredjemand. Men du kan permanent overdrage SOFTWAREN og ledsagende trykte materialer, hvis du ikke beholder kopier af softwaren, og modtageren accepterer vilkårene i denne licensaftale. Hvis SOFTWAREN er blevet opdateret eller opgraderet, skal enhver overdragelse af SOFTWAREN omfatte den seneste opdatering og alle tidligere versioner.
(c) Hvis denne SOFTWARE indeholder flere skabeloner til medier (som f.eks. disketter og CD-ROM), og disse medier indeholder den samme software, må du kun bruge den ene form for mediet, der passer til din computer. Du må ikke bruge de resterende former for medier på en anden computer.
(d) Du må ikke bruge softwaren fra flere lokationer i et multibruger- eller netbaseret system på noget tidspunkt.

3,2 Open source-software og anden tredjepartssoftware
(A) SOFTWAREN kan bruge open source-software og anden tredjepartssoftware (heri kaldet "OSS, osv.").
(B) OSS osv. i tilfælde af det foregående afsnit er underlagt OSS's licens osv. (heri kaldet "OSS-licens"), og du skal overholde OSS-licensen.
(C) hvis der er forskelle mellem vilkårene i denne licensaftale og OSS-licensen, har OSS-licensen forrang, og vilkårene i denne licensaftale gælder ikke.

4. INGEN GARANTI 

Roland giver ingen garanti, hverken udtrykt eller stiltiende, med hensyn til nogen form for software, herunder, uden begrænsning, nogen stiltiende garanti for salgbarhed eller egnethed til et bestemt formål.


5. INTET ANSVAR

Roland kan ikke svare på henvendelser vedrørende denne systemsoftwareopdaterer. Læs venligst vejledningen i sin helhed, og bemærk, at du skal bruge SOFTWAREN PÅ EGEN RISIKO.
Roland hæfter under ingen omstændigheder over for slutbrugerne for skader af nogen art, herunder, men ikke begrænset til økonomiske skader i form tab af fortjeneste eller oplysninger som følge af brugen af eller manglende evne til at bruge dette produkt. Den foranstående bestemmelse er gældende, selv om Roland er blevet informeret om muligheden for sådanne skader. Selv om SOFTWAREN evt. skulle være behæftet med materialefejl, verificerbare og reproducerbare programfejl, påtager Roland sig ikke noget ansvar for ændring af sådanne fejl.


6. LICENSENS OPHØR 

Roland forbeholder sig ret til at opsige denne licensaftale i forbindelse med din evt. manglende overholdelse af nogle af vilkårene og betingelserne i denne licensaftale. Efter licensens evt. ophør skal du straks holde inde med at bruge SOFTWAREN.


7. GENERELLE BESTEMMELSER

(a) Enhver bestemmelse i denne aftale, som er forbudt eller evt. ikke kan håndhæves inden for et retsområde, skal ikke anses for retskraftig i den udstrækning et sådant forbud eller uhåndhævelighed måtte være gældende, men uden at påvirke, svække eller afkræfte de resterende bestemmelser herom.
(b) Denne licensaftale er underlagt og skal fortolkes i overensstemmelse med lovgivningen i Danmark, uden henvisning til principperne om lovkonflikter.

---------------------------------------------------------------------
Copyright (C) 2015 Roland Corporation.   All rights reserved.

JEG ER ENIG OG ØNSKER AT FORTSÆTTE MED DOWNLOAD.

R-07 System Program ( Ver.1.112 )

Support

Quick Links

Downloadable Content