Roland - Support - GO:MIXER PRO

Model

*1: The iOS Camera app does not run. This has been reported to Apple (May 30, 2018).

Apps

iOS Camera app (when using video mode)
Make the connection with GO:MIXER PRO before starting the application.
If the application is started before making the connection with GO:MIXER PRO, right-channel audio is sometimes not recorded.

* When visual recording is done using the iOS Camera app under iOS 11.3/iOS 11.4, in rare cases, right-channel audio fails to be recorded. This is currently under investigation (May 30, 2018).
GarageBand for iOS app (set Input setting to 'Stereo')
If you're using GarageBand for iOS, make the settings as follows.
- Use "Audio Recorder."
- Make the settings as follows.
1. Set [LOOP BACK] switch to "OFF."
  * In this case, you can't use the [MONITOR OUT] knob to control the volume of the smartphone that's connected to the USB port.
2. With the GO:MIXER PRO connected, select "Audio Recorder."
  If the message "Audio Device Connected" is displayed when the GO:MIXER PRO is connected, tap [Cancel].
3. Tap the Input button.
4. Tap [Channel] and set it to "Stereo."
5. Set [Monitor] to "off."

iOS Music Memos app (set Input setting to 'Stereo')
- Make the settings as follows.
1. Tap the Input button.
2. Tap [Channel] and set it to "Stereo."
3. Set [Monitor] to "off."
NOTE:
When using the Roland GO:MIXER PRO with Music Memos, it is not possible to monitor existing tracks through GO:MIXER PRO while recording a new performance.
iOS FiLMic Plus (set Audio setting to 'Stereo')
- Make the settings as follows.
1. Tap the Setting button.
2. Tap the Audio button.
3. Tap [ > ] and set it to "Stereo."

Situation of Livestreaming with GO:MIXER PRO

* It is not possible to monitor existing tracks through GO:MIXER PRO while recording a new performance.