Please check the current version of the system working on you're VRC-01 before downloading the file.

1. Turn on the power while holding down VIDEO SELECT [4] button and ASSIGNABLE DECK [6] button.
   The unit starts in the update mode.
2. Verify the version.
   In the update mode, the buttons light up in the combinations shown below. These indicate the respective version numbers.
   • ASSIGNABLE DECK [4]－[6], [USER]: These indicate the second digit to the right of the decimal point.
   • SCENE [4]－[1]: These indicate the first digit to the right of the decimal point.
   • VIDEO SELECT [4]－[1]: These indicate the integer portion.
   Check the illumination pattern of the buttons to determine the version number.

   No.	Illumination patterns
   	DECK [4]	DECK [5]	DECK [6]	[USER]
   	SCENE [1]	SCENE [2]	SCENE [3]	SCENE [4]
   	VIDEO SELECT [1]	VIDEO SELECT [2]	VIDEO SELECT [3]	VIDEO SELECT [4]
   0	Unlit	Unlit	Unlit	Unlit
   1	Unlit	Unlit	Unlit	■Lit red
   2	Unlit	Unlit	■Lit red	Unlit
   3	Unlit	Unlit	■Lit red	■Lit red
   4	Unlit	■Lit red	Unlit	Unlit
   5	Unlit	■Lit red	Unlit	■Lit red
   6	Unlit	■Lit red	■Lit red	Unlit
   7	Unlit	■Lit red	■Lit red	■Lit red
   8	■Lit red	Unlit	Unlit	Unlit
   9	■Lit red	Unlit	Unlit	■Lit red

3. Turn off the power.

[Ver.1.07] AUGUST 2023

[Ver.1.06] JUNE 2023

[Ver.1.05] OCT 2022

1. Read the software license agreement at the bottom of the screen and select the "I agree" check box.
2. Click the "Download" button to download the system program (vrc01_sys_v107.zip).
3. Unarchive the downloaded file.
   Windows PC: Right-click the file and select "Extract All", then click "Extract".
4. Unarchiving creates a "vrc01_sys_v107" folder.

Caution

• You must not rename the extracted file.
• Never turn off the VRC-01's power while the update is in progress. Otherwise the system program or the VRC-01 itself may be destroyed.

Follow the steps below to install the extracted system program on your VRC-01.

1. Hold down the ASSIGNABLE DECK [1] button and the SCENE [1] button and use the USB cable to connect the DEVICE port on the VRC-01 to the USB port on the computer.
2. The USB drive appears on the screen of the computer.
3. Copy the update program (VRC_upd.bin and VRC_updU.bin) to the UPD folder of the USB drive.
4. On the computer, unmount or remove the USB drive.
5. Updating starts and the SCENE [1] button is blinking during updating.
   ASSIGNABLE DECK [1] button and SCENE [1] button are lit, the update has finished.
   * If ASSIGNABLE DECK [1] button and SCENE [1] button are blinking, restart this procedure.
6. Turn off the power.