---

Model

Maker	Model	OS
Apple	iPhone 12 mini *1	iOS 14
	iPhone 12 *1
	iPhone 12 Pro *1
	iPhone 12 Pro Max *1
	iPhone 11 *1
	iPhone 11 Pro *1
	iPhone 11 Pro Max *1
	iPhone XR *1
	iPhone XS *1
	iPhone XS Max *1
	iPhone X *2
	iPhone 8 *2
	iPhone 8 Plus *2
	iPhone 7 *2
	iPhone 7 Plus *2
	iPhone 6s *2
	iPhone 6s Plus *2
	iPhone SE (2nd generation) *1
	iPhone SE *2

Maker	Model	OS
Apple	iPad Pro 12.9-inch (2nd generation) *2	iPadOS 14
	iPad Pro 10.5-inch *2
	iPad Pro 12.9-inch (1st generation) *2
	iPad Pro 9.7-inch *2
	iPad Air (3rd generation) *2
	iPad Air 2 *2
	iPad (7th generation) *2
	iPad (6th generation) *2
	iPad mini (5th generation) *2
	iPad mini 4 *2

* Does not run on the iPad (5th generation).

*1: If you use other than the iOS camera app, recording is sometimes monaural. If this happens, stereo recording can be accomplished by following the steps below to perform visual recording.
*2: Recording might be monaural. If this happens, stereo recording can be accomplished by starting visual recording following the steps below.

1. Make the connection between the iPhone or iPad and GO:MIXER, then start the standard camera or the 4XCAMERA app.
   Make sure GO:MIXER's POWER indicator is lit.
2. Go back to the home screen on the iPhone or iPad.
   * When you go back to the home screen, the POWER indicator goes dark.
3. Start the app again.
   Make sure GO:MIXER's POWER indicator is lit.
4. When visual recording starts, the audio is recorded in stereo.

Apps

• iOS app "4XCamera Maker"
• iOS app "Beat Sync Maker"
• iOS app "Virtual Stage Camera"
• iOS Camera app (when using video mode)
  Make the connection with GO:MIXER before starting the application.
  If the application is started before making the connection with GO:MIXER, right-channel audio is sometimes not recorded.
  
  * When visual recording is done using the iOS Camera app under iOS 11.3, in rare cases, right-channel audio fails to be recorded. This is currently under investigation (April 24, 2018).
  
  
• GarageBand for iOS app (set Input setting to 'Stereo')
  If you're using GarageBand for iOS, make the settings as follows.
  - Use "Audio Recorder."
  - Make the settings as follows.
  
  1. With the GO:MIXER connected, select "Audio Recorder."
     If the message "Audio Device Connected" is displayed when the GO:MIXER is connected, tap [Cancel].
  2. Tap the Input button.
  3. Tap [Channel] and set it to "Stereo."
  4. Set [Monitor] to "off."
  
  NOTE:
  When using the Roland GO:MIXER with Garage Band, it is not possible to monitor existing tracks through GO:MIXER while recording a new performance.
  Performing recording using GO:MIXER while playing back a recorded track also records the "recorded track" to the recording track on the GO:MIXER.
  * When recording using GO:MIXER has been performed while playing back a recorded track, recording only the recording track on the GO:MIXER is not possible.
  
  
• iOS Music Memos app (set Input setting to 'Stereo')
  - Make the settings as follows.
  
  1. Tap the Input button.
  2. Tap [Channel] and set it to "Stereo."
  3. Set [Monitor] to "off."
  NOTE:
  When using the Roland GO:MIXER with Music Memos, it is not possible to monitor existing tracks through GO:MIXER while recording a new performance.
  
  
• iOS FiLMic Plus (set Audio setting to 'Stereo')
  - Make the settings as follows.
  
  1. Tap the Setting button.
  2. Tap the Audio button.
  3. Tap [ > ] and set it to "Stereo."

Situation of Livestreaming with GO:MIXER


* The information here indicates only the results of confirmation of operation for a Roland product, and does not warrant that the relevant terminal is free of problems.

---