VS-880: Using the Master Insert Switch

Tags: vs-880,insert,effect,master
The VS-880’s Master Insert Switch is a convenient way to insert an effect right before the master outputs. This is perfect for adding compression or a graphic EQ to your whole mix. There are actually two Master Insert Switches: one for the first effect processor and one for the second. Use the following procedure to insert an effect on the whole mix:

1. Select the desired effect to be inserted from either the Effect 1 or Effect 2 processor.

2. Press EDIT/SOLO until "MST EFF1 INS Sw =" is displayed (or "MST EFF2 INS Sw" if you wish to insert Effect 2).

3. Use the TIME/VALUE dial to select "On". The selected effect is now applied to the entire mix.