RA-800: Initializing - Restoring the Factory Settings

Tags: reset,factory,ra-800
The following procedure will clear the internal memory and reload the factory settings:

(CAUTION!!!!: All USER information will be lost!!! Be sure to back up any information you wish to keep!!!)

NOTE: Never turn off the power during a Factory Reset. This may result in corrupted internal data and may prevent the power from being turned on again.

Use the following procedure to reinitialize the RA-800 and restore the original factory settings. However, be aware that this procedure will erase the original factory Performance settings. You should save the Performances to disk before doing this procedure if you wish to save them.

1) Power on while holding WITE.