A-880: Writing the Connections into Memory

Tags: a-880

If you wish to retain the connection assignment you have made, write it into any of the 64 memory locations. A memory location is represented by a Memory
Bank (1-8) and Memory Number (1-8), such as 2-3, 4-8, etc. Use the following procedure to write in your settings:

  1. Press WRITE.
  2. Use the INPUT/BANK (1-8) and OUTPUT/NUMBER (1-8) to assign a memory location.
  3. Press WRITE.
  4. Press SCAN/MIX or SIGNAL.

NOTE: The Control In is not written with each memory number. This means that changing the settings of the Control In at power-up will change the mixing assignment.