GT-10, GT-10B: Calibrating the On-Board EXP Pedal

Tags: adjust,expression,gt-10,re-do,gt-10b,whammy
Use the following steps to calibrate the on-board EXP pedal on the GT-10 or GT-10B:

1. Press SYSTEM.

2. Press cursor (>) right to select PEDAL CALIBRATION.

3. Press CATEGORY/ENTER.

4. Heel back on the EXP pedal until it stops.

5. Press CATEGORY/ENTER.

6. Press the EXP all the way toe-forward.

7. Press CATEGORY/ENTER.

8. Turn the VALUE dial to set the desired threshold for the toe-end switch (1-16). A lower value allows for the switch to be activated with minimal pressure. More force is needed for higher values.

9. Press EXIT when you're finished.