GR-30: Turning The Harmonist On and Off

Tags: gr-30
The Roland GR-30 allows you to turn the Harmonist on or off (for each Patch
utilizing the Harmonizer) using the built-in footpedals. To turn the Harmonist
on or off, use one the following two procedures:

PROCEDURE 1

1) Select a Patch that utilizes the Harmonist, such as A12. Note the red LED
under "ARP/HAR" is lit, indicating the Harmonizer is on.
2) Use the PARAMETER SELECT dial to select PATCH INC/DEC BY S1/S2.
3) Press PEDAL 4 to turn the Harmonizer off.
4) Press PEDAL 4 again to toggle the Harmonizer on or off.

PROCEDURE 2

1) Select a patch that utilizes the Harmonizer, such as A12. Note the red LED
under "ARP/HAR" is lit, indicating the Harmonizer is on.
2) Use the PARAMETER SELECT dial to select anything other than PATCH INC/DEC
BY S1/S2.
3) Press the S2 button on your GK-2A Pickup.
4) Press PEDAL 4 to turn the Harmonizer off.
5) Press PEDAL 4 again to toggle the Harmonizer on or off.