XP-60, XP-80: Synchronizing as Master and Slave

Tags: slave,clock,sync,xp-80,xp-60,mtc,master,mmc
When synchronizing the XP-60/80 to any other device, you will need to use MIDI Clock. ( not MTC or MMC )

Use the following procedure to set the XP-60/80 as Master.

1. Press Sequencer.

2. Press F1 [Setup].

3. Press F6 [SEQ Sys].

4. Set Sync Mode to INTERNAL.

5. Set Sync Output to ON.


Use the following procedure to set the XP-60/80 as a Slave.

1. Press Sequencer.

2. Press F1 [Setup].

3. Press F6 [SEQ Sys].

4. Set Sync Mode to SLAVE.

NOTE: The XP-60/80 will only slave to MIDI Clock.