GT-8: Assigning the CTL Pedal to a Function (Global).

Tags: effect,manual,gt-8
Rather than assigning a function on a per-patch basis, it is possible to have the CTL pedal control a selected function for all the patches in the GT-8. Use the following steps to set the CTL pedal to turn Manual Mode On/Off:

1. Press SYSTEM.

2. Press PARAMETER right to select "Ctl Pdl Function."

3. Turn the VALUE dial to select "Manual Mode On/Off," or you can choose one of the other available functions to be controlled by the CTL pedal.

3. When finished, press EXIT, then press on the CTL pedal to try out the new setting.