AX-7: Setting up a Layer or a Split

Tags: ax-7
Use the following procedure to set up a layer or split on the AX-7:

1. Select Patch A-11. The KEYBOARD MODE UPPER button lights and a Program Change 001 message is transmitted on MIDI Channel 1. If you’re using a General MIDI compatible sound module, this selects a piano sound.

2. Press the KEYBOARD MODE LOWER button and the A-37 plays a GM pad sound on MIDI Channel 2.

3. You’re now ready to create a split or layer. To:

•create a layer—press UPPER and LOWER simultaneously. Both buttons light.

•split the keyboard—press SPLIT button so it’s lit. The keyboard is split at Middle C.