RC-20: Specifications

Tags: rc-20
RC-20: Phrase Recorder

Nominal Input Level:
INPUT: -20 dBu (variable)
MIC: -40 dBu (variable)
AUX IN: -10 dBu

Input Impedance:
INPUT: 1 Mega-Ohm
MIC: 1 Kilo-Ohm
AUX IN: 47 Kilo-Ohms

Nominal Output Level:
OUTPUT: -20 dBu
Output Impedance:
1 Kilo-Ohm

Recommended Load Impedance:
10 Kilo-Ohms or greater

Internal Memory:
Recording Time - 5min. 30sec. (max)
10 loop phrases + 1 one-shot phrase (max)

Controls:
RECORD/PLAY/OVERDUB Pedal
STOP/TAP TEMPO Pedal
INST Knob
MIC Knob
PHRASE SELECT Knob
GUIDE Knob
LEVEL Knob
REVERSE Button
TAP TEMPO Button
WRITE Button
EXIT Button
AUTO START Button
MODE Button

Indicators:
POWER Indicator (Serves also as battery check indicator)
REC Indicator
PLAY Indicator
OVERDUB Indicator
PEAK Indicator
PHRASE USED Indicator
MEMORY FULL Indicator
LOOP QUANTIZE Indicator
TAP TEMPO Indicator
REVERSE Indicator
WRITE Indicator
EXIT Indicator
AUTO START Indicator
INST & MIC Indicator
NORMAL Indicator
CENTER CANCEL Indicator
FLAT AMP SIMULATE Indicator

Connectors:
INST Jack
MIC Jack
AUX IN Jack (Stereo miniature phone type)
PHRASE SHIFT Jack
REVERSE Jack
OUTPUT Jack
AC Adaptor Jack

Power:
Dry battery (R6/LR6(AA)type) x 6: DC 9V
AC Adaptor (DC 9V) - BOSS PSA-120, PSA-120T (OPTIONAL)

Current Draw:
85 mA (9 V max.)
* Expected battery life under continuous use:
Carbon: 9 hours
Alkaline: 25 hours
* These figures will vary depending on the actual condition of use.

Dimensions:
173(W) x 158(D) x 57(H) mm
6-13/16(W) x 6-1/4(D) x 2-1/4(H) inches

Weight:
1.2 kg / 2 lbs 7 oz (including batteries)

Accessories:
Owner's Manual
Roland Service (Information sheet)
Sound Library for RC-20 (Sample Phrase C.D.)
Dry Battery (LR6(AA)type) x 6
* We recommend that alkaline batteries be used when replacing the batteries.

Options:
AC Adaptor BOSS PSA-120
Foot Switch (BOSS FS-5U)

* 0 dBu = 0.775 Vrms

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.