RV-3: Specifications

Tags: rv-3
RV-3: Digital Reverb/Delay

Signal Processing:
A/D Conversion;
16bit linear, 128 times oversampling
D/A Conversion;
16bit linear

Sampling Frequency:
32kHz

Nominal Input Level:
-20dBm

Input Impedance:
1M Ohm

Nominal Output Level:
-20dBm

Output Impedance:
1k Ohm

Recommended Load Impedance:
10k Ohms or greater

Dynamic Range:
110dB or greater (Direct)
95dB or greater (Effect)
* 0dBm = 0.775Vrms

Control:
Pedal Switch
Mode Switch
Balance Knobs
Control Knobs X 2

Indicator:
Check Indicator (serves also as battery check indicator)

Connectors:
Input Jack
Output Jacks A(MONO)/B
AC Adaptor Jack (DC 9V)

Power Supply:
DC 9V
Dry Battery (6AM6/9V)
AC Adaptor (PSA-Series: Optional)

Current Draw:
70mA (DC 9V)

Dimensions:
70(W) x 125(D) x 55(H) mm
2-3/4(W) x 4-15/16(D) x 2-3/16(H) inches

Weight:
420g/15oz (including battery)

Accessories:
Owner's Manual
MODE Label
Dry Battery; 6AM6/9V (alkaline)
Roland service

Options:
AC Adaptor PSA Series (PSA-120)

* In the interest of product development, the specifications and/or appearance of this unit are subject to change without prior notice.