VS-2480, VS-2480CD: Creating a New Project

Tags: vs-2480,vs-2480cd,song,create,new,project
1. Press PROJECT.

2. If “NEW” isn’t visible above F2, press PAGE until it is.

3. Press F2 (NEW) — the PROJECT NEW screen appears.

4. Set the Copy System Prm parameter to:
• Off—to create a new project with default UTILITY menu parameter values (UTILITY menu parameters are described in Chapter 28).
• On—to copy the current project-related UTILITY parameter values into the
new project.

5. Set the Copy Mixer/Scene Prm parameter to:
• Off—to create a new project with default mixer settings and no scenes.
• On—to copy the mixer settings and scenes from the currently loaded project into the new project.

6. Select the desired sample rate and recording mode (Page 96).

7. Name the new project.

8. Press F5 (OK). The VS-2480 displays: "Create New Project, Sure?"

9. To proceed, press ENTER/YES, or press EXIT/NO to cancel the operation.

The VS-2480 asks if you want to store the current project before creating and loading the new one.

10. Press ENTER/YES to save any changes you’ve made to the currently loaded project, or press EXIT/NO to create and load the new project without saving the old one.