ADA-7000, VSR-880: Connecting the ADA-7000 to the VSR-880

Tags: ada-7000,vsr-880

Use the following procedure to set-up the ADA-7000 for use with the VSR-880:

1. With the power off to all devices, connect the VSR-880 to the ADA-7000 with the R-Bus cable.

2. Turn on the ADA-7000, then the VSR-880.

3. Press CLOCK SOURCE on the ADA-7000 to select R-Bus as the sampling clock.

Set up the VSR-880 as follows:

4. Hold down SHIFT and press SYSTEM. "SYS SYSTEM PRM?" will appear in the display.

5. Press ENT/YES.

6. Use the TIME/VALUE dial to select SYS MasterClk=INT.

7. Press ENT/YES to confirm the setting.

8. Press PLAY/DISPLAY to exit.