VS-2480, VS-2480CD: Quick Recording

Tags: vs-2480,vs-2480cd
After connecting your instrument or microphone cable to the input jack and adjusting the sensitivity knob, you must raise the input fader to record the signal to the hard drive.

1. Press IN 1-16 to select the input mixer and raise the fader to for the input you are using to 0db.
2. Press TR 1-16 to select the track mixer.
3. Press and hold Record and the Status button for the track you have routed the input signal to. The Status button will blink red.
4. Press Record and Play to begin recording.