VM-3100: Sending MIDI Control Changes from Faders when in Audio Mixer Mode

Tags: vm-3100
The VM-3100 typically controls MIDI devices when the "FADER ASSIGN" is set to
"MIDI CH". This enables the VM-3100 to operate as a MIDI mixer. MIDI control
change data can also be sent from the channel faders when the mixer is
functioning as an audio mixer. Use the following procedure to enable the
VM-3100 to send control change data (such as volume control) when in Mixer Mode:

1) Press SYSTEM.
2) Press F1-F4 ON/OFF.
3) Press F2 [MIDI].
4) Use the CURSOR buttons to select "Control Type".
5) Use the VALUE dial to select "C.C"