SPD-S: Adjusting Sensitivity

Tags: spd-s
You can adjust the sensitivity of the pads on the SPD-S.

1. Press SETUP so it's lit.

2. Press PAGE > to select PAD.

3. Press ENTER.

4. Strike the pad you want to adjust.

Note: You can set the sensitivity for Pads 1-3 as a group or Pads 4-9 as a group.

5. Press the + or - buttons to select the desired sensitivity value (1-16).

Note: A value of 1 is the least sensitive. A value of 16 is the most sensitive.

6. Press EXIT twice when you're finished.