SPD-11: Setting the MIDI channel.

Tags: spd-11
To set the Transmit Channel, use the following procedure:

1) Choose a Patch.
2) Press EDIT.
3) Press SELECT so the "MIDI" parameter group is lit.
4) Use the CURSOR buttons to select "TX CH."
5) Strike a Pad (and change Pad Banks if necessary).
5) Use the PATCH/VALUE buttons to select a MIDI Channel.
6) Press EDIT to exit.

To set the Receive Channel, use the following procedure:

1) Choose a Patch.
2) Press EDIT.
3) Press SELECT so the "SYSTEM" parameter group is lit.
4) Use CURSOR buttons to select "BASIC CH."
5) Use the PATCH/VALUE buttons to select a MIDI Channel.
6) Press EDIT to exit.