RV-5: Specifications

Tags: rv-5
RV-5: Digital Reverb

Nominal Input Level:
-20dBm

Input Impedance:
1M Ohm

Nominal Output Level:
-20dBm

Output Impedance:
1k Ohm

Recommended Load Impedance:
10k Ohms or greater

Residual Noise:
-93 dBu (IHF-A, Typ.): All knobs at center position.

Controls:
Pedal Switch
E. LEVEL Knob
TONE Knob
TIME Knob
MODE Switch

Indicator:
CHECK Indicator (serves also as battery check indicator)

Connectors:
INPUT-A(MONO) Jack
INPUT-B Jack
Output A(MONO) Jack
Output B Jack
AC Adaptor Jack (DC 9V)

Power Supply:
DC 9V
Dry Battery (9V Type) S-006P / 9 V (6F22 / 9V)
Dry Battery (9V Type) 6AM6 / 9 V (alkaline)
AC Adaptor (PSA-Series: Optional)

Current Draw:
50mA (DC 9V)
* Expected battery life under continuous use:
Carbon: 2 hours
Alkaline: 6 hours
These figures will vary depending on the actual conditions of use.

Dimensions:
73(W) x 129(D) x 59(H) mm
2-7/8(W) x 5-1/8(D) x 2-3/8(H) inches

Weight:
440g/1 lb (including battery)

Accessories:
Owner's Manual
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Dry Battery; (9 V Type) S-006P/9V (6F22/9V)
* The battery that was supplied with the unit is for temporary use, intended primarily for testing its operation. We also suggest replacing this with an alkaline dry cell.

Options:
AC Adaptor PSA Series (PSA-120)

* In the interest of product development, the specifications and/or appearance of this unit are subject to change without prior notice.