GM-70: Velocity Curves
The GM-70 allows you to control the sensitivity of the velocity messages it
transmits. There are five preprogrammed velocity curves to choose from which
are programmable per Branch per patch. To access this parameter do the
1) Press GENERAL EDIT.
2) Press the FUNCTION down button one time. The MIDI mode will be flashing and
it will indicate the current Branch, along with the MIDI channel and the MIDI
Mode that the branch is set to.
3) Select the Branch and the MIDI channel that you want and press the FUNCTION
button until the VELOCITY parameter begins to flash.
4) Use the VALUE buttons to select the appropriate curve.
Note: For organ sounds use