MC-303: MIDI Out/Thru Setting
The MIDI Out connector on the MC-303 can function as a MIDI Thru. Use the
following procedure to set the MIDI Out connector to function as a MIDI Thru
1) While holding SHIFT press keyboard pad #16.
2) Use the SELECT ]< / >] buttons to display "tHr."
3) Use the VALUE dial to select "on."
4) Press EXIT.
NOTE: When MIDI Thru is set to "on," System Exclusive messages received at the
MIDI IN connector will not be retransmitted from MIDI OUT. If ARPEGGIO is on,
no messages received at the MIDI IN connector will be retransmitted from MIDI