STUDIO-CAPTURE, UA-1610: Saving and Loading STUDIO-CAPTURE Settings

Tags: file,load,save,store,recall,settings

Using the STUDIO-CAPTURE Control Panel, you can save the current settings as a file onto a computer and load these settings at a later time.

The following STUDIO-CAPTURE settings are saved in this file:

  • Preamp

  • Compressor

  • Attenuator

  • Monitor mixer A–D

  • Reverb

  • Patch bay


SAVING SETTINGS

Windows:

  1. From the Desktop, click on the Windows icon on the bottom left of the screen.

  2. Select the Control Panel.

  3. Windows 8, 7 and Vista: On the top right of the Control Panel Window, select "View by..." "Small Icons".

  4. Windows XP: On the left taskbar, select "Switch to Classic View".
    NOTE: If the selection states "Switch to Category View" you are already in classic view.

  5. Open the STUDIO CAPTURE Control Panel.

  6. Click on "Device" and then select "Save settings".

  7. Type a name and destination of the file to be saved and then select OK.

Mac OS X:

  1. Click on the Apple icon.

  2. Select Preferences.

  3. On the bottom of the Preferences window, open the STUDIO CAPTURE Control Panel.

  4. Click on "Device" and then select "Save settings".

  5. Type a name and destination of the file to be saved and then select OK.

     

LOADING SETTINGS

  1. In the STUDIO-CAPTURE Control Panel, click on "Device" and then select "Load settings".
  2. Select the file that contains the settings you want to load and then click OK. The STUDIO-CAPTURE's settings will change.