TD-6: Changing the Ambience Settings

Tags: td-6
You can select and make changes to the nine different ambience types available
in the TD-6. Use the following procedure:

1. If necessary, press KIT until it's lit.
2. Press EDIT/SETUP.
3. Press the RIGHT ARROW once until "AMBIENCE" shows in the screen.
Note: To hear the changes you make to the ambience sounds, strike a pad or
hold SHIFT and press KIT.
4 Press ENTER once, and then use the INC/+ or DEC/- buttons to turn the
ambience on or off.
5. Press the RIGHT ARROW once again and use the INC/+ or DEC/- buttons to
change the AMBIENCE SEND LEVEL.
6. Press the RIGHT ARROW once again and use the INC/+ or DEC/- buttons to
change the ambience STUDIO TYPE.
7. Press the RIGHT ARROW once again and use the INC/+ or DEC/- buttons to
select the ambience WALL TYPE.
8. Press the RIGHT ARROW once again and use the INC/+ or DEC/- buttons to
select the ambience ROOM SIZE.
9. Press the RIGHT ARROW once again and use the INC/+ or DEC/- buttons to
select the total AMBIENCE LEVEL. (volume).
10. Press EXIT twice when you're finished.