AW-3: Technical Specifications

Tags: aw-3
AW-3 Dynamic Wah

NOMINAL INPUT LEVEL
-20 dBu

INPUT IMPEDANCE
1 M ohm

NOMINAL OUTPUT LEVEL
-20 dBu

OUTPUT IMPEDANCE
1 k ohm

RECOMMENDED LOAD IMPEDANCE
10 k ohm or greater

RESIDUAL NOISE
-92 dBm (IHF-A Typ.)

CONTROLS
Pedal Switch, DECAY Knob, MANUAL/VOWEL 2 Knob, SENS/VOWEL 1 Knob, MODE Switch

INDICATOR
CHECK Indicator (Serves also as tempo and battery check indicator)

CONNECTORS
GUITAR IN Jack, BASS IN Jack, OUTPUT Jack, EXP/CTL Jack, AC adaptor Jack

POWER SUPPLY
DC 9V;
Dry Battery (9 V type) S-006P/9V (6F22/9V)
Dry Battery (9 V type) 6AM6/9V (alkaline)
AC Adaptor (PSA-Series: optional)

CURRENT DRAW
50 mA (DC 9V)

*Expected battery life under continuous use;
Carbon: 2 hours
Alkaline: 6 hours
These figures will vary depending on the actual conditions of use

DIMENSIONS
70(W) x 125(D) x 55(H) mm
2-13/16(W) x 4-15/16(D) x 2-3/16(H) inches

WEIGHT
420 g / 15 oz (including battery)

ACCESSORIES
Owner's Manual
Roland Service
Dry Battery (9 V type) S-006P/9V (6F22/9V)
*The battery that was supplied with the unit is for temporary use - intended primarily for testing its operation. We recommend that alkaline batteries be used when replacing the batteries.

OPTIONS
AC Adaptor (PSA-Series)
Expression pedal Roland EV-5
Footswitch (momentary-type) BOSS FS-5U
Dry battery (9 V type) 6AM6/9 V (alkaline)

*0dBu = 0.775 Vrms

*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.