Enabling the VS8F-3 switch on a VS-1680/VS-1880/VS-1824.

Tags: vs8f-3,vs-1680,vs-1824,vs-1880,effects,board
To enable the use of a VS8F-3 expansion board on a 1680,1880 or 1824 you will need to turn the VS8F-3 SW to on, using the following procedure:

1)While holding down SHIFT, press F5(SYSTEM)

2)Press F1 (SYSPM)

3)CURSOR to VS8F-3 Use SW.

4)Turn the TIME/VALUE wheel to select ON


6)Perform the Shutdown Procedure.

Note: Enabling the VS8F-3 SW will disable tracks 15 and 16.