PA-410: Technical Specifications

Tags: pa-410
PA-410 POWERED MIXER

MIXER SECTION

FREQUENCY RESPONSE:
20 Hz to 20 kHz +1 / -3 dB (SENS: min)

TOTAL HARMONIC DISTORTION:
0.05% or less (SENS: min, 20 Hz to 20 kHz at Nominal Output)

NOISE LEVEL (Input Terminated with 150 W, IHF - A, typ.)
Equivalent Input Noise Level:
-125 dBm

Residual Noise Level:
-85 dBm [All fader: min]
-75 dBm [All fader: max] [All channel fader: min]
-55 dBm [Master fader: max] [All channel fader: max] [All SENS: min]
-50 dBm [Master fader: max] [All channel fader: max] [All SENS: max]

CROSSTALK:
-65 dB or less (1 kHz Between channels)
-60 dB or less (1 kHz Between L and R)

EQUALIZER:
Normal Channel
HIGH EQ: +15 dB (10 kHz Shelving Type)
MID EQ: +15 dB (10 kHz Shelving Type)
LOW EQ: +15 dB (10 kHz Shelving Type)
Stereo Channel
HIGH EQ: +15 dB (10 kHz Shelving Type)
LOW EQ: +15 dB (10 kHz Shelving Type)

GRAPHIC EQUALIZER:
Center Frequency: 60, 120, 360, 1 k, 6.3 k, 12 k [Hz]
Variable Range: + 12 dB

DIGITAL REVERB:
Sampling Frequency: 32 kHz
Signal Processing
A / D Conversion: 16 bit linear, 128 times oversampling,DS modulation, AFmethod
D / A Conversion: 16 bit linear

POWER AMPLIFIER SECTION

RATED POWER OUTPUT:
200 W x 2 (Stereo, 4 W load, 1 kHz, 0.2% or less THD)
120 W x 2 (Stereo, 8 W load, 1 kHz, 0.2% or less THD)

RECOMMENDED LOAD IMPEDANCE:
4W or greater (Stereo)

FREQUENCY RESPONSE:
10hZ to 40kHz ( + dB, 1W / 8W)

TOTAL HARMONIC DISTORTION:
0.2% or less (Stereo, 8W load, 1kHz at rated output)

SN RATIO:
110dB or greater (Power in shorted, IHF-A)

OTHERS

NORMAL CHANNEL:
PAD Switches x 6
SENS Knobs x 6
HIGH Knobs x 6
MID Knobs x 6
LOW Knobs x 6
MON Knobs x 6
EFF / REV Knobs x 6
PAN Knobs x 6
Channel Faders x 6

STEREO CHANNEL:
SENS Knobs x 2
AUX Switches x 2
HIGH Knobs x 2
LOW Knobs x 2
MON Knobs x 2
EFF / REV Knobs x 2
BALANCE Knobs x 2
Channel Switch x 2
RTN Knob
SEND EFF Knob
MON Fader
REVERB MODE Knob
REVERB LEVEL Knob
Equalizer (7 Band) x 2
EQ Buttons x 2 (L, R)
Master Volume Faders x 2 (L, R)
Power Amplifier Switch
Power Switch

INDICATORS:
PEAK Indicators x 2 (L, R)
METER:
VU Meters x 2 (L, R)

CONNECTORS:
Input Connectors (XLR type) x 6
Input Jacks (Stereo 1 / 4 inch phone type) x 6
Input Jacks (1 / 4 inch phone type) x 4 (L (MONO), R)
Input Jacks (RCA phono type) x 8 (L, R)
Return Jacks (1 / 4 inch phone type) x 2 (L (MONO), R)
Send Monitor Jack (1 / 4 inch phone type)
Send Effect Jack (1 / 4 inch phone type)
Master Output Jacks (1 / 4 inch phone type) x 2 (L, R)
Power In Jacks (1 / 4 inch phone type) x 2 (L, R)
Rec Output Jacks (RCA phono type) x 2 (L, R)
Speaker Output Jacks (1 / 4 inch phone type) x 2 (L, R)
Headphones Jack (Stereo 1 / 4 inch phone type)

POWER SUPPLY:
AC 117V, AC 230V

POWER CONSUMPTION:
450 W (117V)
480 W (230V)

DIMENSIONS:
538 (W) x 555 (D) x 183 (H) mm
21 - 3 / 16 (W) x 21 - 7 / 8 (D) x 7 - 1 / 4 (H) inches

WEIGHT:
24.7kg / 54lbs 8oz

ACCESSORIES:
Owner’s Manual