PW-10, V-WAH: Storing Settings
It is possible to store settings into three different memory locations in the PW-10. Use the following steps to do so:
1. Adjust the TYPE, WAH RANGE, and DRIVE knobs until the desired sound is achieved.
2. Press and hold the MANUAL/MEMORY button for at least two seconds, then release it- (the MEMORY indicator will flash).
3. Press the MANUAL/MEMORY button to select the memory location (color) where you want to save the new settings. Note: Each time the button is pressed, the memory indicator will change from red, to green, then yellow. Each color represents a different memory location.
4. Press and hold the MANUAL/MEMORY button for at least two seconds again. The new settings are now saved into the selected memory location.