D-70: Changing Performances via MIDI

Tags: d-70
To switch Performances on the D-70 from an external MIDI device, you must send a program change on the selected Control Channel. This changes all of the D-70’s six parts with a single MIDI message. The Control Channel must be set to a channel that is not currently being used by any of the six parts. Use the following procedure to set the Control Channel:

1. Press EDIT.

2. Press F5 [SYSTEM].

3. Use the CURSOR buttons to select "Control CH."

4. Use the VALUE dial to set the appropriate value.

5. Press EDIT to exit.