VS-1680: Digital Out Connectors

Tags: vs-1680
1) Press [Master]. The Master Block is displayed.
2) Press [F5 (DOUT1)]. If "DOUT1" does not appear in [F5], first press [PAGE]
until "DOUT1" is displayed, and then press [F5 (DOUT1)].
3) Determine what is to be output from the DIGITAL OUT connectors by rotating
the TIME/value dial.

DOUT1 (DIGITAL OUT1): This selects what sounds are heard through the DIGITAL
OUT1 (coaxial) connector.
MST: Same sound as is heard from the MASTER jacks (MIX bus).
MON: Same sound as is heard from the MONITOR jacks.
EFX1: The sounds assigned to the (EFX1) EFFECT bus.
EFX2: The sounds assigned to the (EFX2) EFFECT bus.
AUX1/EFX3: The sounds assigned to the AUX1 bus. With EFFECT B installed, the
sounds are those assigned to the (EFX3) EFFECT bus.
AUX2/EFX4: The sounds assigned to the AUX2 bus. With EFFECT B installed, the
sounds are those assigned to the (EFX4) EFFECT bus.
AUX3/AUX: Sounds assigned to the AUX3 bus. With EFFECT B installed, the
sounds are those assigned to the AUX bus.

4) Press [PLAY (DISPLAY)] to return to play condition.

*the DIGITAL OUT2 (optical) connector is set in the same way. Press [F6
DOUT2)] at Step 2.