Calibrating the VH-11
Calibrating the VH-11 is crucial for optimum trigger results and functionality. We recommend calibrating the VH-11 on a regular basis. Use the following procedure to do so:
1. Turn on the TD-12.
2. Release the hihat clutch and drop the VH-11 pad on top of the controller.
3. Hold the KIT button and press TRIGGER.
4. Turn the OPEN/CLOSE knob on the top of the VH-11 until the indicator in the TD-12's display is hovering between the two arrows ( > - < ).
5. Press EXIT, then readjust and tighten the hihat clutch.