VM-3100, VM-3100PRO: Routing Effects

Tags: vm-3100,vm-3100pro
Use the following procedure to select the location of the effects processor:

1) Press EZ ROUTING.
2) Press F1-F4 ON/OFF. The functions appear in the display.
3) Press F3[FX].
4) Use the UP and DOWN CURSOR buttons to select "Location" (location in the
mixer) and "Patch" (the patch number).

*On the 3100Pro, use the LEFT and RIGHT CURSOR buttons to switch between
Effect1 and Effect2).

5) Rotate the VALUE dial to select the location in the mixer and patch number.