GT-5: Adjusting The Input Level

Tags: gt-5
The level of the signal output by a guitar differs between models. Use the
following procedure to set the GT-5’s input level to suit the output of your

1) Connect a standard guitar cable from the guitar’s output to the GT-5 Input.
2) While playing your guitar, adjust the Input Volume Knob so that the
OVERLOAD indicator lights briefly during loudest passages.
3) The OVERLOAD indicator will light 6db before distortion begins (clipping
level). If the input level is too high, the GT-5 will not produce the desired
4) Adjust the Output Knob to an appropriate level for the devices connected to
the GT-5’s Outputs.