AR-2000: Updating the AR-2000 Using a Memory Card

Tags: ar-2000

Use the following procedure to prepare a memory card and update the AR-2000:

Preparing the Version Up Card:

1. Power on while holding SELECT. The screen will display the current version.

2. While holding STOP press PLAY. The screen will display “BOOT MODE 1.00.”

3. Use the MODE button to select “2. CARD Save.”

4. Press ENTER, the screen will display “Save Ver. 1.00 - Insert CARD.”

5. Insert the card into slot A, the screen will display “Save Ver. 1.00 - Push ENTER.”

6. Press ENTER.

Updating the system using the updater card:

1. Power on the AR-2000.

2. Insert the updated system card into slot A.

3. Press ENTER.

4. When the screen displays “Install Completed - Power On Please” turn on the power off then on.

Note: Make sure that the updater card is formatted on the older system to work properly.