RD-600: Damper Pedal Polarity

Tags: rd-600
The RD-600 allows you to reverse the polarity of its damper pedal input jack.
This is useful if you are
using a non-Roland pedal switch with opposite polarity (i.e.-the damper effect
is applied even though you are not pressing the pedal). Use the following
procedure to set the damper pedal polarity:

1) Press EDIT so it is lit.
2) Use the PAGE buttons [< or >] to display "DamperPolarity."
3) Use the INC/YES and DEC/NO buttons to display the desired setting (STANDARD
4) Press EDIT.