SE-70: MIDI Patch Mapping

Tags: se-70
The Boss SE-70 will allow you to select Patches via MIDI using program change
messages. Use the following procedure to assign a Patch to an incoming program
change number:

1) Press UTILITY until the MIDI screen is displayed.
2) Use the PARAMETER buttons to select "MIDI Program Map."
3) Use the VALUE KNOB to select the Patch number ("Prog#") you wish to access.
4) Press PARAMETER > once.
5) Use the VALUE buttons (< or >) to select the incoming program change
message number you wish to use to call up the selected Patch.
6) Press the EXIT button to return to Play mode.