HPD-15: Local Control

Tags: midi,hpd-15
Most of the time, it is recommended to set Local Control to "OFF" when recording a pad performance from the HPD-15 into an external MIDI sequencer. Use the following steps to turn Local Control Off:

1. Press SYSTEM.
2. Press PARAMETER < or > until "MIDI LocalControl" shows in the display.
3. Turn the PATCH/VALUE to select "OFF."
4. Press SYSTEM or EXIT when finished.

Note: If Local control is set to OFF, and you're not using MIDI with the HPD-15, no sounds can be heard when the pads are struck. Make sure to set Local control to "ON" when MIDI is not being used.