XP-80, XP-60: Initializing - Restoring the Factory Settings

Tags: reset,factory,initialize,xp-80,xp-60
The following procedure will clear the internal memory and reload the factory settings:

(CAUTION!!!!: All USER information will be lost!!! Be sure to back up any information you wish to keep!!!)

NOTE: Never turn off the power during a Factory Reset. This may result in corrupted internal data and may prevent the power from being turned on again.

1) Press UTILITY.

2) Press 8 on the key-pad followed by ENTER.

3) Press F6: EXECUTE.

4) If Memory Protect is on, dial OFF, then ENTER.

5) Press F6: EXECUTE.