TD-7: Program Change Numbers

Tags: td-7
Changing Patches on the TD-7 will send MIDI program change messages to any
connected MIDI device. Program change messages sent to the TD-7 will cause the
TD-7 to change Patches. However, when OFF is selected, no messages will be sent
or received. Use the following procedure to assign a program change message to
a Patch:

1) Press EDIT.
2) Use the CURSOR buttons [< or >] to select Patch, then press ENTER.
3) Use the CURSOR buttons [< or >] to select PGM, then press ENTER.
4) Use the CURSOR buttons [< or >] to select the value field, then use the
VALUE dial to select the desired program change number.
5) Press EXIT several times to return to the play screen.