MS-1: Turning Off Memory Protect

Tags: ms-1
There are 6 separate Protect switches that must be off in order to load any data via SysEx or overwrite a sample / sequence. Bank A, Bank B, Seq 1, Seq 2, Seq 3, & Seq 4. Use the following procedure:

1) Press SYSTEM and cursor to Protect.

2) Press BANK A and set to OFF with + and - buttons.

3) Press BANK B and set to OFF with + and - buttons.

4) Press SEQ 1 (Pad 1) and set to OFF with + and - buttons.

5) Press SEQ 2 (Pad 2) and set to OFF with + and - buttons.

6) Press SEQ 3 (Pad 3) and set to OFF with + and - buttons.

7) Press SEQ 4 (Pad 4) and set to OFF with + and - buttons.

8) Press EXIT .