BR-1180CD, BR-1180: Recalling a Scene Without Changing the Track Volumes

Tags: volume,br-1180cd,br-1180,settings,mixer,scene
When a scene is recalled, the volume value of each track is also recalled, but the physical position of the faders will not change. This means that the fader positions will not match the actual volumes. If you wish to leave only the track volumes unchanged at the current fader positions when a scene is recalled, use the following procedure:

1. Press UTILITY.

2. Use CURSOR to select the “SCENE” icon, and press ENTER.

3. Use CURSOR to move the cursor to “Track Level,” and use the TIME/VALUE dial to select “FADER.”

Track Level
Specify the volume of each track when a scene is recalled.

The settings will change to the mixer settings of the recalled scene. In this case, the physical positions of the panel faders may differ from the actual track volume when a scene is recalled.

When you recall a scene, the track volumes will remain the same as the physical positions of the panel faders.

4. Press EXIT several times to return to the top screen.