GR-20: Assigning the Expression Pedal to Control Pitch.

Tags: function,gr-20,exp
Use the following steps to assign the EXP pedal so that it controls pitch:

1. Press the EXP PEDAL button.

2. Turn the NUMBER/VALUE dial to select one of the following pitch bend values:

b1 - When the pedal is pressed, the pitch changes up to a 4th from the original pitch.

b2 - When the pedal is pressed, the pitch changes up to a 5th from the original pitch.

b3 - When the pedal is pressed, the pitch changes up one octave from the original pitch.

b4 - When the pedal is pressed, the pitch changes down to a semi-tone from the original pitch.

b5 - When the pedal is pressed, the pitch changes down to to one octave from the original pitch.

3. When you're finished, press the EXIT button.
Tip: If you wish to save the new settings, press the WRITE button and then turn the NUMBER/VALUE dial to choose a desired USER patch location (1-99). Press WRITE once again.