DD-6: Specifications

Tags: dd-6
DD-6: Digital Delay

Nominal Input Level:
-20 dBm

Input Impedance:
1M Ohm

Nominal Output Level:
-20 dBm

Output Impedance:
1k Ohm

Recommended Load Impedance:
10 Ohms or greater

Delay Time:
1ms - 5.2s
* Values may vary according to mode and connections.

Residual Noise:
-90 dBu (IHF-A, Typ.): All knobs at center position

Controls:
Pedal Switch
E. LEVEL Knob
F. BACK Knob
D. TIME Knob
MODE SWITCH

Indicator:
CHECK Indicator
(Used for indication of TEMPO, HOLD, and WARP, and to check battery)

Connectors:
INPUT-A (MONO) Jack
INPUT-B Jack
OUTPUT-A (MONO) Jack
OUTPUT-B Jack
AC Adaptor Jack (9 V DC)

Power Supply:
DC 9 V: Dry Battery (9 V Type) S-006P/9 V (6F22/9 V)
Dry Battery (9 V Type) 6AM6/9 V (Alkaline)
AC Adaptor (DC 9V) - BOSS PSA-120, Optional

Current Draw:
65mA (DC 9V)
*Expected battery life under continuous use:
Carbon: 2 Hours
Alkaline: 6 Hours
* These figures will vary depending on the actual conditions of use.

Dimensions:
70(W) x 125(D) x 55(H) mm
2-3/4(W) x 5(D) x 2-3/16(H) inches

Weight:
440g / 1 lb. (Including Battery)

Accessories:
Owner's Manual
Leaflet ("USING THE UNIT SAFLEY," "IMPORTANT NOTES," and "Information")
Dry Battery (9 V Type) S-00P/9 V (6F22/9 V)
MODE Sticker
Application Sticker
* The battery that was supplied with the unit is for temporary use - intended primarily for testing its operation. We also suggest replacing this with an alkaline dry cell.

Options:
AC Adaptor PSA-120

* 0 dBu = 0.775 Vrms

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.