RD-600: Connecting an EV-5 / EV-7 Expression Pedal
Use the following procedure to connect an EV-5 or EV-7 Expression Pedal to the RD-600:
1. Connect the pedal to the FC1 or FC2 socket.
2. Press EDIT so it is lit.
3. Press the PAGE < / > buttons to select "FC Assign."
NOTE: Be sure to select the FC1 or FC2 socket that you have connected your pedal to.
4. Press the INC/YES and DEC/NO buttons to select "CC11: Expres."
5. Press EDIT so it is not lit.
6. Rotate the adjustment knob on the EV-5 or EV-7 to the MINIMUM position.