Changing the Power Up Mode

Tags: jv-1000,jv-880,jv-80,jv-90
The JV-80/90/880/1000 will let you set the power up mode to one of two
settings: DEFAULT (which will set the JV to the first User Patch or Performance
on power up) or LAST SET (which will set the JV to the last Patch or
Performance that you were using before you shut it off). Use the following
procedure to change the power up mode:

On the JV-80 and 1000:
1) Press TUNE/COMMON.
2) CURSOR to "Power Up" and use the INC/DEC buttons to select either DEFAULT
or LASTSET.

On the JV-90:
1) Press TUNE/COMMON.
2) Press the DOWN CURSOR button.
3) Press the RIGHT CURSOR button to select "Power Up" and use the INC/DEC
buttons to select either DEFAULT or LASTSET.

On the JV-880:
1) Press SYSTEM
2) Use the DATA dial to select the "Power Up =" display.
3) Press the RIGHT CURSOR button once and use the DATA dial to select either
DEFAULT or LASTSET.